The removable Mounting Frame allows installation and removal of the aerator while the plant remains online. The Mounting Frame creates a square opening in the endcap of sufficient size to allow the aerator impeller to pass through.
Enclosed endcaps on oxidation ditches are intended to contain aerosols and prevent odour migration but in-doing-so they can limit the supply of atmospheric gases, particularly if lane curtains are installed in the opening between the endcap and the water level. Surface aerators require a continuous supply of air to function effectively.
The Aeris Global Mounting System includes four lamella plate cassettes allowing unrestricted supply of air to feed the aerator impeller but prevent splash from escaping.
Upon removal, the entire assembly is placed on a Support Platform, purpose-designed to accept the Mounting Frame. Following placement, unrestricted access to the aerator is available for personnel to perform tasks such as disassembly, inspection, adjustment and maintenance.
An insertable Yoke allows the drive to be disconnected and removed while the impeller remains in position but above the flow of water in the ditch.
Aeris Global® has manufactured the Aerator Mounting System for aquaturbo® AER-GD aerators in multiple sizes from 22kW to 160kW. 220kW and 300kW versions have been recently developed for a project in West Australia.
Aeris Global use and recommend Hansen Industrial Gearboxes and WEG Electric Motors.
QUALITY IS A CHOICE – Leading organisations choose aeris.global®
